SC10U
15
English
Note:
1. If you have two audio (A2DP) devices connected to your headset then
the audio from one device will interrupt the audio from the other device.
For example, if you are playing music from the primary mobile phone,
then it can be interrupted by playing music from the secondary mobile
phone and vice versa.
2. You have to use a motorcycle specific GPS, which transmits turn-by-turn
voice instructions to the headset by Bluetooth. Most automotive GPS
systems do not have this feature.
3. The Sena SR10 is a Bluetooth two-way radio adapter for group
communication, and uses Hands-Free Profile. The incoming audio from
the two-way radio via SR10 is heard in the background while having an
intercom conversation or a mobile phone call.
4. The GPS navigation or a radar detector could be connected to the SR10
by wire. The GPS voice instruction or the radar detector alarm is also
heard in the background via SR10 while having an intercom conversation
or a phone call. Please refer to the SR10 User’s Guide for details.
5.3 Advanced Selective Pairing - A2DP Stereo or
Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the SC10U for A2DP stereo music only or for mobile
phone handsfree only. These instructions are for advanced users who
want to pair the SC10U to their smartphones with only one selective
profile: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the SC10U, you must
clear the previous pairing list on both devices: the mobile phone and
the SC10U. To clear the pairing list on the SC10U, please do a factory
reset or following the pairing list clearing procedure described in
section 14.17, “Factory Reset” or 14.14, “Delete All Bluetooth Pairing
Information”. To clear the pairing list on the mobile phone, please refer
to the mobile phone manual. For most smartphones, delete the SC10U
from the list of Bluetooth devices in the settings menu.