9
P
RELIMINARY CONFIGURATIONS
(PM
SIZE AND BATTERY TYPE
)
Upon first configuration, the setting of the PM size which is compatible with the type of Cabinet will be required
Choose the size of the PMs and confirm by pressing the SAVE icon.
PM size compatible with the USMPW Cabinets
PM size compatible with the USMPX Cabinets
During the first configuration, you will also be asked to set the type of battery you wish to use:
- Conventional Battery (blocks of conventional batteries housed within an independently installed cabinet or stand)
- Modular Battery (Battery Unit Array).
Select and confirm after pressing the SAVE icon.
NOTE:
if you wish to modify the configuration you have made, use the following procedure:
Change PM* size
•
Enter the Configuration procedure.
•
Remove all PMs configured within the system.
•
Exit the procedure, saving the configuration just created without any PM.
•
Once you enter the configuration procedure again, you will be asked to select the PM size.
Summary of Contents for AVARA Multi Power Series
Page 4: ......
Page 31: ...27 PART 2 USMPW CONFIGURATOR...
