GB
56
8.7 PC control
The MC 1500 controller can receive control commands from a PC. Computers
with operating systems XP/Vista/Win7 can be used.
The computer is connected to the connection (13) of the controller using a RS232
cable. The MC 1500 can also be connected to a PC’s USB interface using a USB
1.1-to-RS232 converter (accessory) – with full USB functionality.
The CD-ROM supplied contains demonstration software for controlling the
MC 1500, a DDL file for integrating the controller steering into user-own software
and information on controlling the MC 1500 via a hyper terminal. The demo soft-
ware allows to comfortably control all functions of the MC 1500.
The MC 1500 can in principle also be controlled via a palm top unit if the palm is
equipped with a terminal software.
•
A detailed manual on the current version of the software in pdf format can be
found on your CD.
•
The user program supplied has the status of demonstration software be cause
no software support going beyond the accompanying documentation can be
given!
•
In general, customer-specific changes to the operating software cannot be
undertaken. However, the user is provided with all information required to
integrate the MC 1500 into his own operating program with full functiona lity.
•
Access to individual segments, generation of user-defined segment modes.
•
Intensity of each illumination unit can be set to the exact percentage.
•
Exact setting of rotation speed and rotation direction.
•
Exact setting of strobe mode (intensity, frequency and pulse duration).
•
Exact setting of trigger mode (intensity, pulse duration and delay time).
•
Setting of flash mode (pulse duration).
•
Saving of 4 illumination settings in the PC. Downloading of each setting
to the corresponding controller memory station.
•
Generation of setting files comprising sets of five illumination settings (con-
tents of four memory stations plus current MC 1500 setting). User-defined
archiving of numerous setting files on the hard drive or storage medium.
•
Uploading of five MC 1500 settings (see above) to the PC for archiving them
as setting files.
•
Downloading of setting files to the MC 1500 memory stations for calling up
the archived settings.
•
It is not possible to set different delay times (trigger mode) per PC and store
them to the different memory stations of the MC 1500. See Section 8.6.
Fundamental software properties
Please note
Summary of Contents for VisiLED MC 1000
