SCHOTT ProLab 4000, Operating Manual, Page: 52 / 228

Access to the meter ProLab 4000
52 ba75646e03 12/2012
5.5.1 Access control
The administrator defines the type of access to the meter.
The setting applies to all users and the administrator.
Anonymous

Calibrate and measure

Create file for manual storage

Create user configuration

Delete files in the folder, Anonymous
User type User rights
Note
Only one user can be the administrator. The administrator is adjusted
in the delivery condition. The administrator can only create users of
the type, user.
Type of access Description
Access with password The meter can only be unlocked by enter-
ing the password for a certain user.
Access with electronic
key Access with electronic key only. No addi-
tional password is required here.
Access with el. key and
password To be able to work with the meter, a pass-
word has to be entered in addition to
access with the electronic key.
1 Open the User menu with Administration... .
The User administration dialog box pops up.
The General register card is open.
2 Select the type of access and confirm with [OK] .
The new setting is active when the ProLab 4000 is switched on
the next time.