SCHOTT ProLab 4000, Operating Manual

Page: 193 / 228

ProLab 4000 Configurations
193 ba75646e03 12/2012
14.3 Loading a configuration
All users who can create a configuration can also load it.
When loading a configuration, all settings stored in the configuration file
can be loaded.
1 Open the File menu with Select configuration... .
The Open file dialog box pops up.
2 Select a configuration file ("*.ste") and confirm with [OK] .
The Configuration window pops up.
3 The configuration for all measured parameters can be viewed
but not changed.
4 If required, output the settings to the interface with [Print] .
5 Load the configuration with [OK] .
The settings stored in the configuration are active.
6 Close the Configuration window with [Terminate] .