ProLab 2000
Operation
81
ba75577e03
11/2009
4.9.1
Manual storage
Proceed as follows to transmit to the data storage and simultaneously
download to the interface a measurement dataset:
If the data storage is full
The following window appears if all storage locations are occupied:
You have the following options:
z
To erase the entire data storage, confirm
Yes
.
z
To cancel the storage process and switch to the measured value
display, confirm
No
. Then you can e.g. transmit the stored data to a
PC (see page 84) and subsequently erase the storage (see
page 87).
1
Open the menu for manual storage with
<STO>
.
2
If necessary, use
<
▲
><
▼
> and
<MENU/OK>
to change and
confirm the
SAMPLE ID
(1 ... 999).
The dataset is stored. The meter switches to the measured
value display.
- 26.04.2006 11:24:16
- pH 7.000
24.8 °C SC
SAMPLE ID
:
1
Continue
<STO> 1 of 646
Data storage full. Erase?
Yes
No
Warning