Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.010
Page 4
2 Application range
The
SCHMIDT
®
LED Measured Value Display MD 10.010
(article no.:
527320 and 528240) is used to display measured values which are trans-
mitted by a sensor via an analog signal (current or voltage). The supply
voltage of the sensor can be obtained from the LED display. Switching
points for two alarm outputs can also be derived from the input signal. The
galvanically isolated analog output allows the scalable output of the dis-
play values.
The
SCHMIDT
®
LED Measured Value Display MD 10.010
can be used
for
SCHMIDT
®
flow sensors as well as for other sensors (e.g. pressure,
temperature, humidity) which are equipped with standard analog outputs.
The
SCHMIDT
®
LED Measured Value Display MD 10.010
is designed
for the use inside closed rooms and is not suitable for outdoor use (risk of
condensation on electronic parts). Moreover, the use in safety relevant
applications are not allowed.
3 Mounting instructions
Dimensions
Figure 1: Dimensions of housing
13
4
10
6
100
90
10
0
90
60
27
30
6,3
4,9
max. 120
