Schmick SK116 Operation Manual Download Page 3

 

• 

 Damaged cord: Do not use a cord that shows cracks or abrasion damage along its length or at either end. 

Any damage to the cord may cause a short circuit, fire and/or electric shock. If the power cord is damaged, it must be 

replaced by the manufacturer or its service agent. Contact the service department on 

1300 376849 (Ext2)

 or email 

[email protected]

  

• 

 Disconnection: Never unplug the unit by pulling the cord. Always grip the plug firmly and pull straight out 

from the power point. 

• 

 Electrical work: If the installation of this appliance requires any electrical work, make sure it is carried out by 

a qualified electrician. 

 

General Safety Instructions (Continued)

 

 

Usage conditions and restrictions 

• 

 Indoor domestic and/or commercial use: This appliance is intended for indoor domestic use or industrial / 

commercial. 

• 

 Intended purpose: Do not use this appliance for anything other than its intended purpose, and only use it as 

described in this manual. Do not attempt to alter or modify this appliance in any way. 

• 

 Usage restrictions: This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning the use of the appliance by a person responsible for their safety. 

• 

 Children: Supervise children to ensure they do not play with the appliance. Close supervision is necessary 

when any appliance is used by or near children.  Never allow children to operate, play with or crawl inside the 

appliance. 

• 

 

WARNING!

 Do not use any electrical appliances (such as ice cream makers) inside refrigeration appliances, 

unless they are approved for this purpose by the manufacturer. 

 

 

Cleaning and maintenance 

• 

 Disconnect: Unplug the appliance before cleaning or servicing. Failure to do so can result in electric shock, 

injury or death. Do not connect or disconnect the plug when your hands are wet. 

• 

 Flames: Do not let open flames or ignition sources enter the appliance. 

• 

 Flammable/explosive substances: Never clean this appliance with flammable fluids.  Do not  store or use 

volatile, flammable or explosive substances such as aerosol cans with a flammable propellant in or close to this or 

any other appliance. The fumes can create a fire hazard or explosion. 

• 

 Solvents: Do not use solvent based cleaning agents or abrasives on the interior as these may damage or 

discolor the surfaces of the appliances. 

• 

 Door Seal: Use eucalyptus oil twice a year with clean cloth to wipe and clean the ‘door seal’. 

• 

 

WARNING!

 Do not use mechanical devices or other means to accelerate the defrosting process. Never use a 

sharp or metal instrument to remove frost or clean the appliance. Use a plastic scraper, if necessary. 

• 

 Service: Do not attempt to repair, modify or replace any part of the appliance unless specifically 

recommended in this manual. Refer all other servicing to a qualified technician, or contact the sales support line for 

advice on examination or repair of the appliance on 

1300 376849 (Ext2)

,  you can also email on 

vicservice@bar-

fridges-australia.com.au 

• 

 Do not use sharp objects for cleaning. Do not use high pressure water  

•              Clean the inside cabinet of cooler with a clean damp cloth or with neutral soap. Avoid damage by never 

using abrasive or flammable cleaning products. 

• 

 If you have purchased a stainless steel model, please see stainless steel care guide supplied with purchase. 

 

 

 

 

 

 

 

 

 

Summary of Contents for SK116










Reviews: