background image

10

EN

RSS36-G-EN

Operating instructions

Safety sensor

RSS 36 

10. 

EU Declaration of conformity

Name of the component:

RSS 36

Type:

See ordering code

Description of the component:

Non-contact safety sensor

Relevant Directives:

2006/42/EC

2014/53/EU

2011/65/EU

Machinery Directive

RED-Directive

RoHS-Directive

Applied standards:

EN 60947-5-3:2013, 

EN 300 330 V211:2017,

ISO 14119:2013, 

EN ISO 13849-1:2015, 

IEC 61508 parts 1-7:2010,

EN 62061:2005 + AC:2010 + A1:2013 + A2:2015

Notified body for the prototype test:

TÜV Rheinland Industrie Service GmbH

Am Grauen Stein, 51105 Köln

ID n°: 0035

EC-prototype test certificate:

01/205/511502/19

Person authorised for the compilation  

of the technical documentation:

Oliver Wacker

Möddinghofe 30

42279 Wuppertal

The currently valid declaration of conformity can be  

downloaded from the internet at wwwschmersalnet

K.A. Schmersal GmbH & Co. KG

Möddinghofe 30, 42279 Wuppertal

Germany

Phone:  +49 202 6474-0

Telefax:  +49 202 6474-100

E-Mail: [email protected]

Internet: www.schmersal.com

Place and date of issue:

Wuppertal, January 8, 2020

Authorised signature

Philip Schmersal

Managing Director

EU Declaration of conformity

Original

KA Schmersal GmbH & Co KG

Möddinghofe 30

42279 Wuppertal

Germany

Internet: wwwschmersalcom

We hereby certify that the hereafter described components both in their basic design and construction conform 

to the applicable European Directives 

Summary of Contents for RSS 36











Reviews: