20
EN
PROTECT
-SELECT
-D-EN
Operating instructions
Multifunctional safety controller
PROTECT SELECT
PROTECT SELECT OEM
9. EU Declaration of conformity
Name of the component:
PROTECT SELECT
1)
1)
SYS Firmware: 1.1.0 or higher
Hardware:
CIFG or higher
Type:
See ordering code
Description of the component:
Multifunctional safety controller
Relevant Directives:
Machinery Directive
EMC-Directive
RoHS-Directive
2006/42/EC
2014/30/EU
2011/65/EU
Applied standards:
EN ISO 13849-1:2008 + AC:2009,
EN ISO 13850:2008,
EN 62061:2013,
IEC 61508-1..7:2010,
EN 60947-5-1:2004 + AC:2005 + A1:2009
Notified body, which approved
the full quality assurance system,
referred to in Appendix X, 2006/42/EC:
TÜV Rheinland Industrie Service GmbH
Alboinstr. 56, 12103 Berlin
ID n°: 0035
Person authorized for the compilation
of the technical documentation:
Oliver Wacker
Möddinghofe 30
42279 Wuppertal
K. A. Schmersal GmbH & Co. KG
Möddinghofe 30, D - 42279 Wuppertal
Postfach 24 02 63, D - 42232 Wuppertal
Phone: +49 - (0)2 02 - 64 74 - 0
Telefax: +49 - (0)2 02 - 64 74 - 1 00
E-Mail: [email protected]
Internet: http://www.schmersal.com
Place and date of issue:
Wuppertal, 20 April 2016
Authorised signature
Philip Schmersal
Managing Director
EU Declaration of conformity
Original
K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
We hereby certify that the hereafter described components both in their basic design and construction conform
to the applicable European Directives.
The currently valid declaration of conformity can be
downloaded from the internet at www.schmersal.net.
The PROTECT SELECT OEM is supplied with a separate
declaration of conformity.