EN
Operating instructions pages 1 to 10
Original
BDF200-SD
BDF200-FB
Operating instructions
Control panel with emergency stop
EN
1
Content
11 Function 1
12
Target group: authorised qualified personnel
13 Explanation of the symbols used 1
15 General safety instructions 1
23 Comprehensive quality insurance to 2006/42/EC 2
24 Purpose 2
26
Safety classification emergency stop
3 Mounting
31 General mounting instructions 3
32 Dimensions 3
33 Mounting of the pushbutton and illuminated pushbutton caps for
34 Fixing 4
41 General information for electrical connection 4
42 Serial diagnostic SD interface 4
5 Combinations and functions of control elements
51 Combination possibilities of control elements 5
53 Mode of operation of the safety outputs 5
54 Function of the command and signalling devices 5
55 Function of G24 indicator lamp 5
61 Diagnostic functions of SD interface 6
82 Disposal 6
9 Appendix
91 Pin assignment SD variant 7
92 Pin assignment FB variant 7
93 Field bus data FB variant 8
10 EU Declaration of conformity
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear The operating
instructions must be available in a legible condition and a complete
version in the vicinity of the device
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information
Caution:
Failure to comply with this warning notice could
lead to failures or malfunctions
Warning:
Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine
1.4 Appropriate use
The products described in these operating instructions are developed
to execute safety-related functions as part of an entire plant or machine
It is the responsibility of the manufacturer of a machine or plant to
ensure the correct functionality of the entire machine or plant
The safety switchgear must be exclusively used in accordance with
the versions listed below or for the applications authorised by the
manufacturer Detailed information regarding the range of applications
can be found in the chapter "Product description"
1.5 General safety instructions
The user must observe the safety instructions in this operating
instructions manual, the country specific installation standards as well
as all prevailing safety regulations and accident prevention rules
Further technical information can be found in the Schmersal
catalogues or in the online catalogue on the Internet:
wwwschmersalnet
x
000 / 1
1
2018 / v
A
- 103015929-EN / D / 2018-1
1-02 /
AE-Nr
10081
