7. For versions with emergency exit and emergency release the following should also be considered:
- For versions with emergency exit it must be possible to open the guard system from within the hazardous
area; it must not be possible that the guard system is blocked from the inside.
- By operating the emergency release lever outside of the hazardous zone it must be possible to open the
guard system.
2
Adequate measures must be taken to ensure protection against tampering either to prevent tampering of the safety guard,
for instance by means of replacement actuators.
2
Damaged or defective components must be replaced.
8 Disassembly and disposal
8.1 Disassembly
The safety switchgear must be disassembled in a de-energised condition only.
8.2 Disposal
The safety switchgear must be disposed of in an appropriate manner in accordance with the national prescriptions and
legislations.
