SAFETY INSTRUCTIONS
30.30.01.00127/03
www.schmalz.com
EN | 10
DANGER
Electric shock resulting from incorrectly connected components
This can result in death or serious injury from electric shock and fire.
►
All work on electrical equipment must be carried out by qualified electrical
specialists only
►
When working on electrical components of the lifting device, it must be
completely disconnected from the power supply.
►
Suitable fire extinguishing equipment must be on hand!
WARNING
Risk of injury due to misuse or non-observance of warning and safety
notices
Persons could be harmed
►
The equipment must be used by trained personnel only.
►
Prevent unauthorized persons from switching the lifting device on and off with a
padlock on the main or motor-protection switch.
Installation location/workplace requirements
1.7
Installation location requirements
The lifting device is available in two versions, the
V
ACU
M
ASTER
W
INDOW
and the
V
ACU
M
ASTER
W
INDOW
C
OMFORT
.
Neither
of these can be used in potentially explosive atmospheres.
DANGER
Non explosion-proof switching components
Risk of fire and explosion.
►
Product must not be used in potentially explosive atmospheres.
The lifting device must not be used in areas with acidic or alkaline materials or in contaminated
atmospheres.
With electrical vacuum generation, the lifting device
can be operated in rooms with an ambient
temperature of b0°C and +40°C; with pneumatic vacuum generation, the room must have an
ambient temperature of b0°C and +50°C.
