Spare and wearing parts, accessories
EN-US · 30.30.01.02237 · 00 · 04/20
87 / 94
11 Spare and wearing parts, accessories
11.1 Spare and Wearing Parts
Maintenance work may only be carried out by qualified personnel.
WARNING
Risk of injury due to incorrect maintenance or troubleshooting
4
Check the proper functioning of the product, especially the safety features, after every
maintenance or troubleshooting operation.
NOTE
Improper maintenance
Damage to the Compact terminal SCTSi and the ejectors!
4
Switch off the supply voltage before any maintenance.
4
Secure it so that it cannot be switched back on.
4
The Compact terminal SCTSi must only be operated with a silencer and press-in screens.
The following list contains the primary spare and wearing parts.
Part no.
Designation
Legend
10.02.02.04141
Silencer insert
W
10.02.02.03376
Screen
S
10.02.02.04152
Insulating plate
W
Legend:
•
W
earing part =
W
•
S
pare part =
S
4
When tightening the fastening screws on the silencer module, observe the maximum tightening
torque of 0.5 Nm.
When you replace the silencer insert, we recommend that you also replace the insulating plate.
11.2 Accessories
Part no.
Designation
Note
21.04.05.00351
Power connection
cable
M12 5-pin socket [L] with open cable end | 1.5 m
21.04.05.00352
Power connection
cable
M12 5-pin socket [L] with open cable end | 5 m
21.04.05.00353
Network connec-
tion cable
M12 4-pin plug [D] to M12 4-pin plug [D] | 1 m
21.04.05.00354
Network connec-
tion cable
M12 4-pin plug [D] to M12 4-pin plug [D] | 5 m
21.04.05.00355
Network connec-
tion cable
M12 4-pin plug [D] to RJ45 plug | 1 m
21.04.05.00356
Network connec-
tion cable
M12 4-pin plug [D] to RJ45 plug | 5 m