OPERATOR’S MANUAL
62
C2G rondo
Version: 27201 - H
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
4.11
Connection to the pump
4.12
Installing the switchgear cabinet
fig. 21
01
Motor
12
Air pipe clamp
13
Hose line pressure side
16
Hose line suction side
Connect the hose lines (13 pressure side
+ 16 suction side) to the pump body. Use
the corresponding air pipe clamps (12)
on both sides for this.
Warning!
Make sure that the connections
from the
body of the pump to the installation kit /
pipework are as nearly aligned as is
possible.
The hose lines must always be attached
to the pump on the one side
(compensator function), see diagram.
fig. 22
For electrical connection information
regarding the Control NT panel, please
refer to the corresponding instruction
manual 27248
8228
14
