Schluter Systems LIPROTEC LT ES 1, Directions For Use Manual

Page: 34 / 219

EN
Connection
Directions for use for LED strips 31
6.2 Connection variants
The components of the LIPROTEC system can be assembled and connected in the
following combinations:
 One or more LED strips (LTES1 through LTES6), connected to a power pack with an
upstream light switch (see the "Directions for use of the LED strip," Fig. F)
 One or more LED strips (LTES1 through LTES6, LTES9), connected to a receiver for
remote control, with an upstream power pack and optional light switch (see the
"Directions for use of the LED strip," Fig. E)

One or more LED strips (LTES1 through LTES6, LTES9), connected to a building
automation system, which assumes the power supply and control (see the "Directions
for use of the LED strip," Fig. G)
The connection possibilities applicable for the existing component are described in the
following.
6.3 Connecting the LED strip to the power pack
DANGER
There is a possibility of electrical shocks when a component is connected to an
energised power pack!
Connecting a component to an energised power pack can lead to very severe or deadly
injuries.

Before working on the components, make sure the power pack is not energised.

Do not connect the power pack to the mains connection until all connection work
has been concluded.
DANGER
Risk of fire on overloaded connections!
Burning components and cables can lead to severe or deadly injuries.

Always connect only one cable to the connection terminals or terminal box.

Follow the special directions in the directions for use in case several components
should be connected.
Connecting an LED strip directly to a power pack

Conduct the connection cable of the LED strip to the incoming cable channel through
the borehole of the mounting profile.

Establish a cable reserve by looping the cable at the beginning of the channel. During
the course of mounting, make sure this cable loop is not impaired.

This guarantees that the LED strips can be removed from the profile without the
cable becoming tensioned.