Schluter Systems LIPROTEC LT ES 1, Directions For Use Manual

Page: 26 / 219

EN
Safety
Directions for use for LED strips 23
– Store the silica gel balls in such a way that they are kept away from children.
– Dispose of the silica gel balls according to the applicable regulations after
mounting.
2.3.2 Preventing injuries

Eye injuries from dazzling LED strips.
–
Never look directly into a lit LED strip.
– Position the LED strip in such a way that no one can look directly into the light
source.
 Swallowing the sealing glue can result in nausea and vomiting.
–
Store the sealing glue in such a way that it is kept away from children.

Irritation of the eyes or skin due to skin with the sealing glue.
–
Prevent contact with the eyes and skin.
– Store the sealing glue in such a way that it is kept away from children.
2.4 Preventing property damage

Damage to the LED strip through improper connection.
–
Make sure that all other work is performed only by qualified, expert personnel.
– Connect the cables only with the provided terminal connectors.

Damage to the LED strip due to moisture.
–
Observe the protection class of the respective component.
 Damage to the LED strip due to mechanical loads.
–
Make sure a bending radius of 20 mm is not exceeded (see Fig. D).

Damage to the LED strip due to electrostatic discharges.
–
Make sure static charges are discharged.
– Make sure that the LED strip is stored only in the provided packaging.
2.5 Personnel qualifications
Anyone who designs a lighting system with LIPROTEC components or connects it to the
mains voltage must have the following skills:
 Establishment of an electrical connection of the power pack to the mains voltage
according to valid regulations (electrician)
 Familiarity with and implementation of requirements on the installation of the
LIPROTEC components in bathrooms and wet rooms
 Correct assembly of the combination of components of the LIPROTEC system
Anyone who mounts or connects components must have the following knowledge and skills:

Establishment of electrical connections to the safety extra low voltage (SELV)

Ability to estimate and prevent risks arising from the handling of electrical products