Schluter Systems LIPROTEC LT ES 1, Directions For Use Manual

Page: 25 / 219

EN
Safety
22 Directions for use for LED strips
The component must not be used for the following applications under any circumstances:

Outdoors
 Underwater
 In potentially explosive atmospheres

In swimming pools, saunas or steam baths
Exceeding the load limit required for the power pack is possible through an incorrect
combination of the system components. This can be the case if LED strips are expanded by
soldering. The component of the LIPROTEC system must not be used in the wrong
combination.
Intended use includes the reading and understanding these instructions and the observance
and following of all information in these instructions, especially the safety instructions.
Any other use is expressly considered not to be intended and leads to an expiration of the
warranty and liability claim.
2.2 Conditions for use
Make sure that the components are used only under the following surrounding conditions:
 Temperature: -20 °C to +40 °C

Relative humidity for Bluetooth receiver, remote control, power pack and terminal
connections: 45 % to 85 %
Make sure that the scope of protection is observed according to DIN VDE 0100-7001 when
the components are used in bathrooms or wet rooms.
2.3 Basic safety instructions
2.3.1 Preventing severe and deadly injuries

Electrical shocks during the connection of the LED strip are possible.
–
Make sure that the power pack is connected to the mains connection by qualified
electricians only.
– Make sure that all other work is performed only by qualified, expert personnel.
– Before connecting the components, make sure the power pack is not energised.
– Connect the LED strip or receiver only to the power pack and not directly to the
mains connection.

Deadly burn injuries or smoke inhalation are possible if the sealing glue ignites.
–
Keep the sealing glue away from ignition sources.
 Deadly burn injuries or smoke inhalation are possible if incorrectly laid components
ignite.
–
Observe the minimum distances specified in these instructions.
 Children may die due to suffocation or the swallowing of small parts.
–
Store the end caps in such a way that they are kept away from children.