Schluter Systems LIPROTEC LT ES 1, Directions For Use Manual

Page: 24 / 219

EN
General notes
Directions for use for LED strips 21
1 General notes
These instructions help you mount and connect the LIPROTEC LED strip to the various
components of the Schlüter
®
LIPROTEC system or a commercial building automation
system.
This LED strip is referred to as the "component" hereinafter insofar as various components
of the Schlüter® LIPROTEC system do not have to be differentiated.
These instructions are part of the product. Make sure that the instructions are constantly
available at the place of use and in a legible state. Provide these instructions if you sell the
product or pass it on in another manner.
Various elements of these instructions have fixed design features. You can easily
differentiate the following elements:
Normal text

Lists
–
Second-order lists
Objective of the action

Action prompt

Intermediate result

End result
Table titles are bolded.
Tips contain additional information.
Manufacturer's address
Schlüter-Systems KG
Schmölestraße 7
58640 Iserlohn, Germany
Phone: +49-2371-971-0
Fax: +49-2371-971-111
info@schlueter.de
2 Safety
2.1 Intended use
The components of the LIPROTEC system are used only to create decorative or
accentuating lighting effects indoors, privately or commercially.
The system may be used in bathrooms or wet rooms only under consideration of the types of
protection of the components and scope of protection according to DIN VDE 0100-701.
The LED strips may be installed only on a heat-conductive, smooth foundation.