6. Safety elements / danger areas
90 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
6.3
SAFETY COVER
During production the area of the production space is protected by a safety cover. Opening
the safety cover is done with a pushbutton and is only necessary when rigging, setting up or
changing wires. It is not possible to produce while the safety cover is open. For setting up
the wire feed and the processing station it is necessary to press a confirm button simultane-
ously.
If the safety cover cannot close completely or gets blocked, the operator must open the
safety cover again and clear the blockage.
DANGER
Risk of injury when the confirmation button is pressed!
Pressing the confirm button when the safety cover is open deactivates
some safety functions.
There are the following risks
Crushing of fingers and hands by moving parts.
Crushing of fingers and hands by the gripper.
Pulling-in and catching of long open hair and / or loose clothing by
the feeding belts.
Hitting of the upper extremities by moving parts.
Shearing-off fingers by the cutting unit and the blades.
Parts of the machine can move unexpected.
The following instructions are to be followed!
The person, which is actuating the confirm button, is responsible
that no other person is in the danger zones!
Only trained personnel are allowed to use the confirm button.
DANGER
Risk of injury when lowering!
The following instructions are to be followed!
Prior to close the safety cover, the operator has to ensure, that no
other person is in the area of the machine.
NOTICE
Damage to property if not observed!
The following instructions are to be followed!
Before lowering the safety cover, the operator must ensure that all
stations are positioned so that no collisions occur when the safety
cover is lowered.
There must also be no contact between the safety cover and the
connections of the stations.