5. Product description
72 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
5.4.2
Available Options
Not the right product for your application?
Talk to us and / or visit our website.
Schleuniger
will be glad to provide you with information
about all available products, all the latest news, as well as customized solutions for your indi-
vidual requirements.
Material Change Detection - MCD
With the material change detection (MCD) the CrimpCenter registers a change of the wire,
the contacts or the crimping tools during the production. To ensure that the correct materi-
als are used, leads and contacts must be scanned and verified when they are replaced dur-
ing the production of an order. The machine recognizes the change and requests the neces-
sary measurements to ensure that it is the correct material. MCD or the preset quality checks
also apply when switching between orders.
The material change detection recognizes
wire change
contact change
Tool replacement
Scanning the barcode is a crucial point to make sure the
right material is used. Therefore, a barcode scanner must
be integrated to use the MCD.
Additional quality checks, such as crimp height measure-
ment, pull-out force measurement, CFM (crimp force moni-
toring), MGS (MicroGraph system, microsection analysis
system) and others, can be defined in the EASYSoftware according to requirements via Qual-
ity Conformance Mode (QCM).
Barcode scanner
With a barcode scanner, you can extend your CrimpCenter
with another way of improving performance and quality.
By reading barcodes of wires and contacts, you can trans-
fer the data quickly, easily and securely to your CrimpCen-
ter. This reduces the susceptibility to error by the manual
input. Likewise, in combination with, for example, the
material change detection, you can ensure that the opera-
tor uses the correct wires, contacts and applicators and
block the production release for the wrong materials.