3. Transport / packaging / storage
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
29 | 268
NOTICE
Center of gravity when transporting!
Danger through uneven weight balance.
The following instructions are to be followed!
During transportation, the machine can get out of balance or slip if
the position of center of gravity is not observed.
WARNING
Danger of load dislocation during transport!
Danger from load dislocation.
The following instructions are to be followed!
During transportation in a craft, the product may slip off and cause
serious material damage.
Even the craft may start skidding, which could result in an accident
with incalculable consequences.
Always secure the product in the craft to prevent from slipping off.
Always reposition the machine with suitable utilities like a hand lift truck or a fork lift.
During transportation in a sloping terrain, the product must be secured properly so that it
cannot go away or slip uncontrolled.
3.8
STORAGE
Store the product under the following conditions:
Do not store outdoor.
Make sure that no condensation water accumulates on machine parts due to strong
thermal fluctuation. Do not remove wrapping and transportation locks, if any, until the
final place of installation is reached.
Protect the machine against tilting.
Slightly oil components of the product if it is stored a longer period of time.
If single component units of the machine are not installed immediately after delivery,
store them in a dry, protected and vibration-free place.
Make sure that the assemblies are not placed directly on the floor. Storage on planks is
recommended.