8. Commissioning
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
181 | 268
Swivel - Side 2
Notice
Sometimes the machine switches off the control voltage automatically. This happens for
safety reasons.
The following dialog will guide you through the referencing. Follow the instructions. They
will be explained on the next pages:
Caution
Because the safety cover is open for referencing the confirm button has to be pushed for
some actions when the machine executes movements.
Tools / Aids
Fig. 92: Setup block
1
Fig. 93: Overview - Setup Pins
Setup block
(Article number 50000 132 570)
Set-up pin, short (1)
(article number 434 202)
Notice
The bolt marked headings (e.g.
EASY-Software (4/18)
) show
where an information is shown
and / or
where an action has to be carried out.