Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 168

Page: 168 / 346

8. Commissioning

168 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Wire Deflector

CrimpCenter

Fig. 81: Conveyor belt - Deflector - below

The wire deflector improves the depositing

quality depending on the order specifica-

tions.

EASY

Fig. 82: EASY - Deflector

The correct position for the best result is pro-

posed in EASY.

Continuous Quality Control

CrimpCenter

Fig. 83: Conveyor belt - Removal area

In the sampling area, individual wires can be

removed during production to carry out

continuous quality control.
Likewise, the depositing quality of the wires

can be improved with the sliding plate.

EASY

Fig. 84: EASY - Removal Area

The correct position for the best result is pro-

posed in EASY.

Here the value 60 would be set on the

scale.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Search results

Summary of Contents for CrimpCenter 64 SP

Reviews:

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 168 / 346

Search results

Summary of Contents for CrimpCenter 64 SP

Reviews: