manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 153 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 153

8. Commissioning

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

153 | 268

8.7.9

Activate the CrimpCenter

Caution

If you turn off the CrimpCenter at the main power switch or disconnect it from the mains,

wait at least 5 minutes before turning it on again. This time the UPS (Uninterruptible Power

Supply) needs to shut down completely.

CrimpCenter

Fig. 68: Main switch - On

1.

▹

Switch on the CrimpCenter with the

main switch.

Touchscreen

Fig. 69: EASY Software - Home Screen

2.

▹

The automatic startup process begins.

» The CrimpCenter starts up.

» The EASY software is started.

» The login screen appears.

3.

▹

Log in with your personal password.

» You can now operate the CrimpCenter.

Depending on your user rights, you can set up and configure the CrimpCenter. For further

information about the operating with the EASY software please see the EASY operating

manual.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments