8. Commissioning
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
131 | 268
Tab - Towerlight
Press the following button:
In this tab you can make the following settings.
Picture / Screen text
Translation
Description
Blink interval
Blink interval
Here you can set the speed of the flashing
of the signals.
8.5
RECOMMENDED SETTINGS
NOTICE
Recommended settings!
The values shown are based on empirically determined data from
Schleuniger GmbH
.
Other values may be suitable for your application, but it is imperative
that you observe the following points.
These values are for guidance only.
The values may vary depending on the material.
Schleuniger
assumes no liability or guarantee for the values shown.
The responsibility for the adjusted parameters lies exclusively with
the operator of the machine.
8.5.1
Pneumatic
The optimum pressure depends on various factors, such as conductivity and insulation type,
centering of the conductor in the insulation, process temperature and humidity.
Gripper pressure
The recommended values are already stored in the EASY software.