8. Commissioning
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
127 | 268
8.4.2
Service switch
With the Towerlight the CrimpCenter is equipped with a service switch. The switch is marked
with the inscription "SERVICE".
If this switch is activated, the blue LED Element lights up.
Caution
Activating the switch is an exclusively optical function!
The activation has no effect on the CrimpCenter, the EASY software and the security devices.
Inactive
Active
8.4.3
EASY - Description of the function
The Towerlight can be individually adjusted. There are two options available.
Standard configuration
Custom configuration
Standard EASY-Configuration
In this configuration, the default event settings are preset. This presetting can be found in
the previous table. It is possible to adjust the assigned colors and signals of events. The
options depend on the individual CrimpCenter configuration.
Please note that only the current event is displayed.
Example
1.
▹
You are in the setup process.
➥
The yellow LED signal lights up permanently.
2.
▹
You start the production.
➥
The yellow LED signal goes off.
➥
The green LED signal lights up permanently.
3.
▹
An error message appears in EASY.
➥
The green LED signal goes off.
➥
The red LED signal lights up permanently.
➥
(Optional) An acoustic sounds from the siren.
Custom EASY-Configuration
In this configuration, all available events can be set. It is possible to adjust the assigned col-
ors and signals of events. The options depend on the individual CrimpCenter configuration.
There are logical exclusions under individual events.