manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 126 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 126

8. Commissioning

126 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

8.4

TOWERLIGHT

The Towerlight displays the status of the CrimpCenter with light and sound (optional) and is

available in different versions.

Version without siren
Version with siren

If the CrimpCenter does not have a siren, you can retrofit it.

Please contact your local 

Schleuniger

 representative who will gladly help you.

The Towerlight can be individually adjusted. There are two options available.

Standard configuration
Custom configuration

8.4.1

Overview

1

2

3

4

5

Siren Element (1) (Optional)

In the event of any machine standstill error, an audible

signal will sound in addition to the visual signal.

Machine downtime
Error message in EASY software

LED Element - Red (2)

The LED Element - Red lights.

Machine downtime
Error message in EASY software

LED Element - Yellow (3)

The LED Element - Yellow lights.

Standby during set-up

LED Element - Green (4)

The LED Element - Green lights.

Production

LED Element - Yellow (3) and Green (4)

The LED Element - Yellow and Green lights.

EASY "Production" menu is open
EASY "Sample" menu is open

LED Element - Blue (5)

The LED Element - Blue lights.

Service

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments