manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 116 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 116

7. Installation / Mounting

116 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

1

Fig. 46: Transformer

2

Fig. 47: Machine Frame - Transformer

The transformer (1) is mounted on side 2 of the machine behind a protective cover (2).

Computer

WARNING

Personnel Qualification and Personal Protective Equipment!

The following instructions are to be followed!

Maintenance work may only be executed by technical specialist.

See also chapter “Personnel Qualification” and “Personal Protective

Equipment”.

1

The computer (1) is mounted inside the con-

trol cabinet door.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments