7. Installation / Mounting
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
111 | 268
7.3
ELECTRIC INSTALLATION
DANGER
Risk of injury due to electrical voltage!
The following instructions are to be followed!
Training of staff shall be in compliance with government regula-
tions.
The following instructions are to be followed!
Make sure to have equipotential bonding.
Use screened cables, data and control lines in environment
exposed to extreme electromagnetic radiation. Do not use cable
ducts.
When installing the machine, only use components which are in
compliance with the regulations on electromagnetic compatibility
according to the manufacturer.
Do not use any corroded connections. Clean them prior to connec-
tion or replace them.
The machine is equipped with an independent power supply. Even
if the machine is switched off electric components are energized.
DANGER
Risk of injury due to electrical voltage!
Important when connecting the transformer:
Check the correct connection. Consult the wiring diagram.