manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 105 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 105

7. Installation / Mounting

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

105 | 268

7.2.3

(De-) Mounting - Straightener

Installation

The straightener has been demounted for transport. It is attached to the wire feed.

Notice

The (de-) mounting can be facilitated by another person.

1.

▹

Position the straightener in alignment

with the mounting holes.

» Hold the position.

2.

▹

Insert the marked screws.

» Tighten the screw(s).

Not all screws are visible in the picture.

Demounting

Notice

Depending on the straightener, 2 persons are required for (de-) mounting.
The (de-) mounting can be facilitated by another person.

1.

▹

Remove the marked screws.

» Keep the screw(s) in a safe place.

2.

▹

Remove the straightener.

» Keep this.

Not all screws are visible in the picture.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments