manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 83 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 83

8. Programming of articles / production

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

83 | 194

Feeding axis

■

Speed [%]:

 This setting changes the speed of drives while feeding forth and back the raw materi-

al, whereas 0 is the smallest and 100 % the largest selectable value

■

Acceleration [%]

 This setting changes the acceleration of drives while feeding forth and back the

raw material, whereas 0 is the smallest and 100 % the largest selectable value

■

Deceleration [%]:

 This setting changes the deceleration of drives while feeding forth and back

the raw material, whereas 0 is the smallest and 100 % the largest selectable value

8.4.3

Swivel unit side 1 / 2

Concerns all settings for the positioning of the swivel unit 1 and 2 during positioning the raw material

on the individual stations of the machine.

Swivel axis

■

Speed [%]:

 This setting changes the positioning speed of the swivel arm, whereas 0 is the small-

est and 100 % the largest selectable value

■

Acceleration [%]

 This setting changes the acceleration speed of the swivel arm, whereas 0 is the

smallest and 100 % the largest selectable value

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments