Schleuniger CoaxCenter 6000, Reference Manual, Page: 81 / 194

8. Programming of articles / production
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
81 | 194
8.2.11
Batch on / off
To break down the quantity defined under "Quantity", a batch value can be entered which subdivides
the production of the article into smaller quantities (batches). The production is stopped after each
produced batch and a message is shown on the touch screen.
Batches can be used with Post Processing devices (e. g. a wire stacker) to initiate certain processes.
8.2.12
Total batch
Entry of the total amount of batches to be produced.
8.2.13
Remaining batches
Shows the amount of batches still to be produced since the last production start. The value can be set
back to "Total batch" with the command [RESET PRODUCTION COUNTER] .
8.3
RAW MATERIAL EDITOR
8.3.1
Single conductor cable
1
2
3
6
7
8
1
Name
2
Jacket color
3
Jacket diameter
4
Shield diameter
5
Dielectric diameter
6
Inner conductor diameter
7
Q-Cam 360 Analysis
8
Cable type
■
Name: Description of Raw Material (article # type, diameter).
■
Jacket color: Color of jacket.
■
Raw material diameter: The individual diameters on the layers jacket, shield, dielectric, conduc-
tor.
■
Q-Cam 360 Analysis: For the analysis of the scanned article data of the produced article (left or
right end).
■
Wire type: Here we can select between single conductor- and multi layer cables.