Schleuniger CoaxCenter 6000, Reference Manual, Page: 70 / 194

7. General handling / operation
70 | 194
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
5
Diagnostics PreFeeder, guides, stations (feeding unit, swivel arm, cutting unit,
rotary incising unit), stacker, system information, hardware informa-
tion.
6
Data management Data backup, data restore, software update.
7
Messages Current messages, message list, error log, display faulty articles.
Header line
For the easy identification of the functions in a selected screen, there are information for the screen
function, article description and others.
Tabs
As already mentioned the commands and functions within a main screen have due to the space
requirement and for the better overview to be divided into several tabs (e. g. the Processing editor).
7.5.5
Content area
The data entry during programming an article, takes place in this area. Depending on the function
there are also command keys where values can be set directly, e. g. resetting the production counter
or where we can jump directly to another screen (e. g. Raw Material or Processing editor).
By touching a certain key, a drop-down list pops up where the programmer can select preset values.
7.5.6
Footer area
In the footer area there are keys for the commands available for the whole screen or the
CoaxCenter 6000 .
The most important general footer symbols are shown in the following chart:
Key Description Key Description
Ok: Return to next higher
screen level and save entries. Is
represented in the descriptions
with [OK] .
Cancel: Return to next higher
screen level, do not save the
entries. Is represented in the
descriptions with [CANCEL] .
Leave screen: Go to next high-
er screen level. Is represented in
the description with [PREVI-
OUS] .
Back:
e. g. from one procedure
step in the wizard to the previ-
ous one. Is represented in the
descriptions with [BACK] .
Next:
e. g. from one procedure
step in the wizard to the next
one. Is represented in the
descriptions with [NEXT] .
7.5.7
Keys / commands / pictograms
Toggle key
Key for turning on or off a function or a procedure. Other elements and symbols
related to these functional elements, entry fields and graphics which are not
assigned to a function in the selected state are grayed out or disappear completely.