Schleuniger CoaxCenter 6000, Reference Manual, Page: 19 / 194

2. Safety
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
19 | 194
2.7
SAFETY SYMBOLS ON PRODUCT
There are warning symbols on the product. They advise the user about potential danger. An overview
of the stickers can be found in chapter "5.2.7 Danger zones (Page 36)" .
2.8
SAFETY INSTALLATIONS
The built in safety interlocks on the product (safety, protection, monitoring) must not be removed, by-
passed or changed. Check the safety appliances in certain intervals. Defective safety equipment's
must be fixed immediately.
■
Never operate the product with open covers.
■
Never operate the product if the safety cover is open.
■
The emergency stop buttons must always be accessible.
■
Do not remove any safety barriers.
■
Do not break in the emergency stop link between the processing machine and the peripheral
devices in a production line.
2.9
RETROFITTING
Without written permission of Schleuniger , do not make changes or any retrofit work on the product.
The performance and the safety is affected thereby.
Standard options and accessories supplied by Schleuniger are excluded therefrom.
2.10
PERSONAL PROTECTIVE EQUIPMENT
While working on the product, the personnel must be protected from injury or disease.
■
Observe the local regulations and instructions of the operating company
■
The following protective equipment is recommended
Symbol Meaning Description
Workwear Wear tight-fitting workwear with high tensile strength. Avoid
loose or protruding items. They may be catched from mova-
ble machine parts.
Safety shoes
Wear safety shoes. They protect the feet from heavy parts
and bobbins.