Schleuniger CoaxCenter 6000, Reference Manual, Page: 127 / 194

13. Maintenance / maintenance schedule
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
127 | 194
MAINTENANCE / MAINTENANCE SCHEDULE
The machine must regularly be inspected and maintained. This way unexpected faults can mostly be
avoided.
The following chapters support the personnel in maintaining again the machine within a reasonable
time.
■
Maintenance
■
Settings
■
Repair work
Only the maintenance work stated in this operating instruction must be carried out. The personnel
must have the required skill. For all other work contact your local Schleuniger distributor.
The stated intervals refer to one-shift-operation (9 h). For work in multiple shift operation, the interval
times are shorten accordingly.
For the easy maintenance, the modules of the
CoaxCenter 6000 can be extended via a sliding mecha-
nism.
Parts subject to wear and tear
This wear parts are subject to particularly high wear. The service life depends on the operational time
and the material to be processed. Wear parts are to be replaced with moderate effort. Thus only short
downtime results.
■
Feed belts
■
Blade
■
Blades rotary incising unit
Drawings, spare parts, exploded views
■
Available spare parts are listed in the "Parts Catalog" .
■
Additional information to the maintenance work can be found in the component drawings and
the diagrams of the electric parts. See "16 Appendix (Page 155)" .
CAUTION
Use of unverified spare parts!
Unverified- or defective spare parts can lead to personnel injury or property damage.
To avoid any damage, exclusive use of original Schleuniger spare parts is imperative.
13.1
CUSTOMER SERVICE
On serious faults or damage, the help of a specialist may be necessary. For that, the Schleuniger dis-
tributor or the service specialists can help. These need a detailed description of the problem.
■
Exact product description
■
Serial number of the product
■
Software version (incl. language packages)
■
Exact description of the fault (error no. shown on touch screen, if available)
■
Under what circumstances has the error shown up
■
What peripheral devices where connected to the machine when the error occurred
■
Raw material type to be produced at the time the error occurred
Some of this information is available in the diagnostics of the control software.
For technical support, see „
www.schleuniger.com “.