Schleuniger CoaxCenter 6000, Reference Manual, Page: 11 / 194

1. General
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
11 | 194
GENERAL
Thank you for your trust in the Schleuniger technique! You have acquired a high performance Schleu-
niger product, designed and manufactured in our factory to your needs. Read through this manual
with due care and attention. It contains important tips and safety instructions, which allow precise
and reliable production.
1.1
MANUFACTURER
In this Manual, Schleuniger AG Thun, Switzerland is referred to as manufacturer and abbreviated with
„Schleuniger“ .
Schleuniger AG Phone: +41 (0)33 334 03 33
Bierigutstrasse 9 Fax: +41 (0)33 334 03 34
3608 Thun Email: info@schleuniger.ch
Switzerland Web: www.schleuniger.com
1.2
PRODUCT TYPE
This manual is valid for the following products/models:
■
CoaxCenter 6000
The applicable product type and the manufacture year can be found on the rating plate or the EG
declaration of conformity. See “EU-Declaration of Conformity (Register 2)“ of the ring binder.
1.3
INFORMATION ABOUT THE OPERATING INSTRUCTIONS
We have taken every possible measures to ensure the accuracy and completeness of this documenta-
tion. Since errors can be avoided despite the diligence never fully, we are always grateful for any
advice and suggestions.
■
This manual is stated as "Operating instructions according to the machinery directive
2006/42/EU" and is part of the product. It contains all the relevant information necessary to oper-
ate the product efficiently and safely as intended.
■
The following phases of the product life cycle are described:
●
Shipping
●
Commissioning
●
Operation
●
Maintenance
●
Disposal
■
Observe the safety regulations and instructions. The local accident preventions and safety regula-
tions must be followed.
■
If the product changes hands, the manual must be supplied to the new owner.
■
Published modifications and corrections from the manufacturer must be complemented. Ask
your local Schleuniger distributor.
1.3.1
Contents
General
Each person using the product must be properly trained and have read and understood the operating
instructions. This is also imperative, even when the respective person has operated such a product or
similar previously and where they have been trained by the manufacturer.