Schleuniger ACO 08, Operating Manual

Page: 21 / 52

Installation
Operating Manual
| Edition 1.00 (08-2020) | ACO 08 21 | 52
6 INSTALLATION
This chapter describes the steps of assembly and initial commissioning of the product.
Notice
Personnel qualifications
The instructions listed in this chapter must be carried out by a technical specialist !
6.1 INSTALLATION
6.1.1 Remove the ACO 08 and the accessories from the packaging.
6.1.2 Place the device at its final location.
6.1.3 Install the crimping machine-specific cable kit and connect it with the ACO 08.
6.2 COMMISSIONING
Following the proper installation, the levels of the digital IOs must be adapted to the crimping
machine. Common crimping machines are listed in the “Machine profile” menu and can be simply
selected. All required settings are made.
If the crimping machine type is not listed, the information on the settings will be supplied with the
cable kit.