Schiller MAGLIFE LIGHT, User Manual

Page: 18 / 51

MAGLIFE light
4.6 Use of the menu
All the functions other than those accessible via the controls on the unit are selected
from the menus displayed on the screen.
You can enter the main menu in two ways:
−
by pressing rotary button (6) or
−
by pressing key (5) .
Caution: The displayed menus depend on the parameters defined as active in the
configuration (see paragraph 4.7.2 ).
The rotary button is used to:
−
confirm a choice in the menu (when the line is highlighted in blue)
−
make a choice
−
switch to the digital entry mode by making the cursor flash
−
move from one selected field to another without making any change
−
select a status in a toggle function
Double clicking (two clicks in rapid succession) is used to exit any menu. It has the
same function as key
(5) .
Button rotation is used to:
−
move in a menu
−
increase or decrease the value of an entry field
Caution:
Menus disappear if no action is taken for more than 10 seconds.
4.7 Description of menus
4.7.1 Main menu
The main menu is as follows:
It is used to select submenus.
Note: Only the labels corresponding to the installed parameters are displayed.
The main menu contains the following submenus:
Part number: 0-48-0080 Page 18