Page 123
System Settings
11
User Guide
Connectivity
11.4
A
rt.
no.
:
2.
511
335
Rev.
a
CARDIOVIT CS-104
11.4 Connectivity
These settings are applicable for networked installations only.
11.4.1
SCHILLER Server
The SCHILLER Server screen gives the current server connection settings and
details. This is usually defined on installation. The path is defined in the Host field
and the port number (default 8080 or 8181). As the host is defined, the URL path is
automatically entered in the URL field.
Host:
Port:
URL:
Test connection
If any setting is changed, the application will be terminated automatically and must be restarted
Connection successful
semadev.schiller.ch
When the
Test server connection
button
is clicked, the program pings the server to
check the connection. When connection is established, a message is displayed to
that effect. An overview of the SCHILLER Server is given in the SCHILLER Server
communication guide.
11.4.2
SCHILLER Update Server (SUS)
The update server screen gives the current server connection settings and details.
This is usually defined on installation. The path is defined in the host field and the port
number (default 8080). As the host is defined, the URL path is automatically entered
in the URL field.
When the
Test server connection
button
is clicked, the program pings the server to
check connection as described above.
When a Program Update is Detected
When Automatic Update is set, every time the user logs in, a check is made to see if
an update is available. If there is a new update available, an indication is given on the
opening screen.
Update available
Version 4.1 Update
Skip Update
Update available
Info
Update
Skip
Four options are available:
• When the box is ignored, it disappears after a few seconds and the update is not
performed.
• When
Info
is clicked, the release notes of the updated software are displayed.
• When
Update
is clicked the client program is installed (see following).
• If
Skip Update
is selected, the SEMA software is not updated. A small icon
is present in header of SEMA to indicate that an update is available.
