manualshive.com logo in svg

Schiller ARGUS LCM, Operating Instruction, Page: 11 / 56

Share
Download
Schiller ARGUS LCM Operating Instruction Download Page 11

 Page 9

Safety notes

1

Operating Instruction

Additional terms

1.9

A

rt.

 no.

: 2.

510

474 rev.

: d

ARGUS LCM/PLUS

1.8.2

Symbols used on the device

1.9 Additional terms

1.9.1

Implied authorisation

Possession or purchase of this device does not convey any express or implied li-
cense to use the device with replacement parts which would alone, or in combina-
tion with this device, fall within the scope of one or more patents relating to this de-
vice.

1.9.2

Terms of Warranty

Your SCHILLER ARGUS LCM/PLUS is warranted against defects in material and
manufacture for the duration of one year (as from date of purchase). Excluded from
this guarantee is damage caused by an accident or as a result of improper handling.
The warranty entitles free replacement of the defective part. Any liability for subse-
quent damage is excluded. The warranty is void if unauthorised or unqualified per-
sons attempt to make repairs.

In case of a defect, send the apparatus to your dealer or directly to the manufacturer.
The manufacturer can only be held responsible for the safety, reliability, and perform-
ance of the apparatus if: 

• assembly operations, extensions, readjustments, modifications, or repairs are car-

ried out by persons authorised by him, and 

• the ARGUS LCM/PLUS and approved attached equipment is used in accordance

with the manufacturer's instructions.

Potential equalisation

CF symbol. This unit is classified safe for internal and external use. However, It is
only defibrillation protected when used with the original SCHILLER patient cable!

The unit/component can be recycled.

Notified body of the CE certification (TÜV P.S.)

Note: Follow the instructions in the documentation.

There are no express or implied warranties which extend beyond the warranties
hereinabove set forth. SCHILLER makes no warranty of merchantability or fitness for
a particular purpose with respect to the product or parts thereof.

Summary of Contents for ARGUS LCM

























































Reviews:

No comments