www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
18 І 36
aged, have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
f)
Keep cutting tools sharp and clean.
Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g)
Use the power tool, accessories and tool
bits etc. in accordance with these instruc
-
tions, taking into account the working con
-
ditions and the work to be performed.
Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
5)
Service
a)
Have your power tool serviced by a quali
-
fied repair person using only identical re
-
placement parts.
This will ensure that the
safety of the power tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR DE-
HUMIDIFIER
DEHUMIDIFIER SAFETY WARNINGS
1. Guard against electric danger.
2. Do not touch any mechanically moving parts or
hot parts. Do not remove protective covers.
3. Do not use electrical equipment (including exten-
sion cables and connectors) that are faulty.
4. • Check whether the mains voltage matches the
one on the label of the device.
5. • Don´t pull the mains plug in order to unplug the
device from the socket.
6. • Make sure not to damage or run over cables
when moving the device.
7. • The socket has to be earthed and appropriately
secured.
8. • The dehumidifier must not be covered when
used. Don´t put clothes or other objects on it.
9. Keep foreign objects away from air inlet/outlet
openings.
10. Only use the dehumidifier on sturdy and even
ground.
11. Do not turn, tip or change the device position
while it is working.
12. Don´t put the device close to sources of heat, like
radiators, radiant heaters, etc.
13. Don´t use the product close to chemicals and
acids. Those might damage the collection con-
tainer or even the whole device.
14. Unplug the device if it is not used for a longer
period or you want to clean it.
15. If you want to use permanent drainage, make
sure that the hose is not banded and the water
can fl ow through unhindered. Don´t use perma-
nent drainage when temperatures are very low
and the water could freeze.
16. Protect the device from splashing water.
17. Only use an earthed standard socket with a 220-
240V AC connection.
18. This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities or
lack of experience and knowledge if they have
been given supervision or instruction concerning
device (RCD) protected supply.
Use of an
RCD reduces the risk of electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and
use common sense when operating a pow
-
er tool. Do not use a power tool while you
are tired or under the influence of drugs,
alcohol or medication.
A moment of inatten-
tion while operating power tools may result in
serious personal injury.
b)
Use personal protective equipment. Al
-
ways wear eye protection.
Protective equip-
ment such as dust mask, nonskid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c)
Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or bat
-
tery pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d)
Remove any adjusting key or wrench be
-
fore turning the power tool on.
A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and
balance at all times.
This enables better con
-
trol of the power tool in unexpected situations.
f)
Dress properly. Do not wear loose cloth
-
ing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose
clothes, jewellery or long hair can be caught in
moving parts.
g)
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-
related hazards.
4) Power tool use and care
a)
Do not force the power tool. Use the cor
-
rect power tool for your application.
The
correct power tool will do the job better and
safer at the rate for which it was designed.
b)
Do not use the power tool if the switch
does not turn it on and off.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c)
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach of
children and do not allow persons unfa
-
miliar with the power tool or these instruc
-
tions to operate the power tool.
Power tools
are dangerous in the hands of untrained us
-
ers.
e)
Maintain power tools. Check for misalign
-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool’s operation. If dam
-
