General notes
1. After unpacking, check all parts for any trans-
port damage. Inform the supplier immediately of
any faults.
2. Later complaints cannot be considered.
3. Make sure the delivery is complete.
4. Before putting into operation, familiarize your
-
self with the machine by carefully reading these
instructions.
5. Use only original scheppach accessories,
wearing or replacement parts. You can find
replacement parts at your scheppach dealer.
6. When ordering, include our item number and
the type and year of construction of the machi-
ne.
NOTE:
In accordance with valid product liability laws, the
manufacturer of this device shall not be responsible
for damage to and from this device which results
from:
1. Improper care.
2. Noncompliance with the Operating Instructions.
3. Repairs made by unauthorized persons.
4. The installation and use of any parts which are
not original scheppach replacement parts.
5. Improper use and application.
6. Failure the electrical system as a result of
non com pliance with the legal and applicable
electrical directives and VDE regulations 0100,
DIN 57113 / VDE 0113.
We recommend that you read through the
entire operating instructions before putting
into operation.
These operating instructions are to assist you in
getting to know your machine and utilize its proper
applications.
The operating instructions contain important notes
on how you work with the machine safely, expertly,
and economically, and how you can avoid hazards,
save repair costs, reduce downtime and increase
the reliability and service life of the machine.
In addition to the safety requirements contained in
these operating instructions, you must be careful to
observe your country’s applicable regulations.
The operating instructions must always be near
the machine. Put them in a plastic folder to protect
them from dirt and humidity. They must be read by
every operator before beginning work and observed
conscientiously. Only persons who have been
trained in the use of the machine and have been
informed of the various dangers may work with
the machine. The required minimum age must be
observed.
In addition to the safety requirements contained
in these operating instructions and your country’s
applicable re gulations, you should observe the
generally recognized technical rules concerning the
operation of woodworking machines.
Safety notes
In these operating instructions we have
marked the places that have to do with your
safety with this sign.
• Please pass on safety notes and instructions to
all those who work on this machine.
• Personnel entrusted with work on the machine
must have read the operating instructions and in
particular the chapter on safety before beginning
work. Reading the instructions after work has
begun, is too late. This applies especially to per-
sons working only occasionally on the rnachine,
e.g. during setting up or rnaintenance.
• Observe all safety instructions and warnings
attached to the machine.
• See to it that all safty instructions and warnings
attached to the machine are complete and
perfectly legible.
• Check all power supply lines. Do not use defec-
tive lines.
• Make sure that the machine stands stable on
firm ground.
• Insure sufficient lighting in the work area and the
area around the machine.
• Caution when working: There is a danger to
fingers and hands from the rotating tool.
• When working on the machine, all safety mecha-
nisms and covers must be mounted.
• Keep children away from the machine when it is
connected to the power supply.
• Operating personal must be at least 18 years of
age. Trainees must be at least 16 years of age,
but may only operate the machine under adult
supervision.
• Persons working on the machine may be not
GB
GB
Summary of Contents for 1901505901
