manualshive.com logo in svg

Schenker N151RF1, User Manual, Page: 79 / 292

Share
Download
Schenker N151RF1 User Manual Download Page 79

Storage Devices, Mouse, & Audio

Optical (CD/DVD) Device 2 - 5

2

DVD Regional Codes

To change the DVD regional codes:

1.

Go to the 

Control Panel

 

2.

Double-click 

Device Manager (Hardware and Sound > Devices and Printers)

, 

then click the arrow next to 

DVD/CD-ROM drives

. 

3.

Double-click on the DVD-ROM device to bring up the 

Properties

 dialog box, and 

select the 

DVD Region

 (tab) to bring up the control panel to allow you to adjust the 

regional code.

4.

DVD region detection is device dependent, not OS-dependent. You can select 
your module’s region code 

5 

times. The fifth selection is permanent. This cannot 

be altered even if you change your operating system or you use the module in 
another computer.

 Figure 2 - 2

DVD Region Codes

•

Region 1

 - USA & Canada

•

Region 2

 - Western Europe, Japan, South 

Africa, Middle East & Egypt

•

Region 3

 - South-East Asia, Taiwan, South 

Korea, The Philippines, Indonesia, Hong Kong

•

Region 4

 - South & Central America, Mexico, 

Australia, New Zealand

•

Region 5

 - N Korea, Russia, Eastern Europe, 

India & Most of Africa

•

Region 6

 - China

Summary of Contents for N151RF1





































































































































































































































































































Reviews:

No comments