Schenker F516, Concise User Manual

Page: 20 / 124

16
English
Driver Installation
The Device Drivers & Uti User’s Manual disc contains the drivers and utilities
necessary for the proper operation of the computer. This setup will probably have al-
ready been done for you. If this is not the case, insert the disc and click
Install Driv-
ers (button), or Option Drivers (button) to access the Optional driver menu. Install
the drivers in the order indicated in Figure 10 . Click to select the drivers you wish
to install (you should note down the drivers as you install them). Note : If you need to
reinstall any driver, you should uninstall the driver first .
If the Found New Hardware wizard appears during the installation procedure, click
Cancel to close the window, and follow the installation procedure as directed.

Driver Installation General
Guidelines
As a general guide follow the
default on
-
screen instructions
for each driver (e.g. Next >
Next > Finish) unless you are
an advanced user. In many
cases a restart is required to
install the driver.
Make sure any modules (e.g.
WLAN or Bluetooth) are ON
before installing the appropri-
ate driver.
Windows Update
After installing all the drivers
make sure you enable
Win-
dows Update in order to get
all the latest security updates
etc. (all updates will include
the latest hotfixes from Micro-
soft).

Driver Installation & Power
When installing drivers make sure
your computer is powered by the
AC/DC adapter connected to a
working power source. Some driv-
ers draw a significant amount of
power during the installation proce-
dure, and if the remaining battery
capacity is not adequate this may
cause the system to shut down and
cause system problems (note that
there is no safety issue involved
here, and the battery will be re-
chargeable within 1 minute).
Figure 10 - Install Drivers