Schambeck SFD GmbH
Refractive Index Detector RI2012
RI2012 V1.0 06-2013.EN / 28.10.2013
4
http://www.schambeck-sfd.com
2 P
RECAUTION
A
ND
W
ARNINGS
The manufacturer is not reliable for any damage, harm or financial loss caused
directly or indirectly by the use of this instrument if the instrument is handled without
the observation of this manual or handling with carelessness.
■
NOTE
Please read this manual carefully before working with the RI2012 refractive index detector.
In case of any question please do not hesitate to contact you local distributor or Schambeck
SFD GmbH directly.
3 E
LECTRICAL
W
ARNINGS
Before opening the housing of the instrument make sure the detector is switched off
and disconnected from power supply.
The voltage selected at the fuse on the backside of the instrument has to be set
correctly to 110 V or 220 V according to your local power supply.
Before changing the selected voltage the power supply has to be disconnected.
The
detector
may
only
be
connected
to
plugs
with
grounding.
The RI2012 may only be operated in connection with other devices which fit to the
safety requirements.
