The draft2go dispensing system
draft2go
BA-49-001-09
7 von 21
4
The draft2go dispensing system
Thank you for choosing the draft2go dispensing system.
draft2go is an all-in-one dispensing system which is op-
erated without the dispensing technology usually re-
quired in hospitality businesses. Using it for any purpose
other than that described in this operating manual is
considered improper use.
The draft2go system consists of a two-chamber KEG with
gas and beer compartments, an insulating jacket and a
dispensing head.
The KEG is equipped with a flat fitting for the beer com-
partment and an NC valve for the gas compartment.
The draft2go dispensing head is made of high-quality plastic and all components coming into
direct contact with the beer are food-safe.
The flow of beer from the draft2go dispensing head is interrupted by compression of the beer
line tube.
The full KEG should be pre-cooled to 2 - 4°C. At this temperature, the insulating jacket keeps
the KEG at the usual drinking temperature in northern Europe of 4 to 8°C for up to 8 hours. If
the beer is too warm, this can result in excessive foam.
If
the KEG is being kept in a standard refrigerator, the manufacturer’s recommend cooling
the KEG at 2°C for 24 hours before use.
PROHIBITED
The draft2go dispensing system must not be exposed to direct sun-
light and temperatures of above 30°C.
The draft2go KEG must never be placed in a deep freeze to cool it
down.
