Disassembly and Cleaning
draft2go
BA-49-001-09
18 von 21
6.2
Cleaning
6.2.1 Cleaning the dispensing head
PROHIBITED!
Never clean the draft2go dispensing head in a dish washer. The
draft2go dispensing head must not be placed or cleaned in a water
bath. This can lead to the dispensing head malfunctioning com-
pletely.
INSTRUCTION
Parts that come into direct contact with
beer should be rinsed under running
water immediately after use.
If the beer residues are dry, please use
a soft cloth and standard washing up
detergent to clean the dispensing
head.
A new disposable one-way line should be used each time the KEG is
changed. If you want to use a one-way line again to empty the KEG
the next day, make sure you take out the line and rinse it under run-
ning water before using it again.
One-way line and tappet can be cleaned or soaked in a water bath
with standard washing-up detergent. Afterwards, both components
must be rinsed with clean water.
All dispensing head components should
be rinsed under running water immedi-
ately after use.
