42
www.schaerer.com
User Manual SCF - EN
05.2008 / Version 06
Customer Care
Turn stud on bayonet fitting underneath the mixer
bowl clockwise. Mixer jug is released from the
arrester lock.
The propeller of the mixer is now visible and can be
cleaned with a cloth
Dismantle two‑piece mixer jug
Clean both parts of mixer jug and mixer tubing under
warm running water
Allow all parts to dry completely
Re‑assemble all components
On re‑assembly all openings must face in the same
direction.
Replace mixer jug
Turn the bayonet fixing underneath mixer jug back in
clockwise direction
Push mixer tube on mixer jug pipe and combi spout
pipe intakes
Replace milk compartment lid
Ensure that mixer tubing is replaced securely.
This is important as otherwise on the next dosage hot
water or hot choc may escape.
5.2.3 Milk Compartment Cleaning
Wipe weekly or as required with a damp cleaning cloth.
5.2.4 Water Tank Cleaning
Thoroughly rinse out water tank weekly with clear
water.
closed
Ensure that the spiral guide is
on and that the tubing is not
pinched.
Caution!
Scald hazard
Observe the Safety chapter!
