manualshive.com logo in svg

Schaerer Ambiente 2, User Manual

Share
Download
Schaerer Ambiente 2 User Manual Download Page 68

Problems and Error Messages 

 

The temperature sensor in the instantaneous coffee heater is defective. 

 

Contact After Sales Service!

 

 

Wait for approx. 5 minutes (too much coffee water may have been served). 
If the message does not disappear: 

 

Contact After Sales Service!

 

 

The coffee machine is being automatically rinsed. 
If it is programmed to do so: 

Î

 no error. 

 

 

The hoist motor is defective. 

 

Contact After Sales Service!

 

 
 
 

 

temp. sensor coffee 

 

heating up coffee 

rinsing 

selection locked 

 

piston motor timeout 

6.1.3. 

No steam products are served 

 

When the following messages are displayed on the lower display line, no steam 
products can be served. 

 

No products at all can be selected when this message is displayed. 
Execute the cleaning program as described in chapter 5.3. 

 

The temperature sensor in the steam generator is defective 

Î

 Steam emission 

is blocked: 

 

Contact After Sales Service!

 

 

The level sensor in the steam generator is defective 

Î

 steam emission is 

blocked. 
For the first 2 minutes after the display lights up, or when the coffee machine 
has been switched off, no tea or coffee can be served either. Make sure that the 
water tap is turned on. If the problem persists: switch the machine off, wait for 
10-30 seconds and switch it on again. 
If the problem persists: 

)

 

Contact After Sales Service!

 

 

If the system does not reach the programmed temperature after 8 minutes, the 
following message is displayed: “Timeout heat. steam”   

 

Contact After Sales Service!

 

 

Wait for approx. 5 minutes (too much steam may have been drawn off). 
If the message does not disappear, the message “heating steam” is displayed. 

 

Contact After Sales Service!

 

 
 

selection locked 

clean machine 

 

temp. sensor steam 

 

level probe steam 

 

Timeout heat. steam 

 

heating steam 

6.1.4. 

No tea products can be served 

 

No products at all can be selected when this message is displayed. 
Execute the cleaning program as described in chapter 5.3. 

 

If the system does not reach the programmed temperature after 8 minutes, the 
following message is displayed: “Timeout heat.tea” 

 

 

Contact After Sales Service!

 

 

The temperature sensor in the instantaneous water heater is defective: 

Î

 No hot water can be served for tea: 

 

Contact After Sales Service!

 

 

Wait for approx. 2 minutes (too much hot water may have been drawn off). 
If the message does not disappear, the message “heating steam” appears

: 

 

Contact After Sales Service!

 

selection locked 

clean machine 

 

timeout heat. tea 

 

temp. sensor tea 

 

heating tea 

Page 6-4 

BASO-2 - 02.06 - V08

 

Summary of Contents for Ambiente 2



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands